Hi,
Many pilots tell me that they have an error when sending their PIREPs, in fact, pilots using XP11 with the Zibo 737, when putting the gear UP and then OFF, the tracker detects a gear down position. We don't understand if it's the fact to put the landing gear on the OFF position that triggers the error "Landing gear down" on the tracker or not.
Anybody have an idea or a solution ? For information, all the Zibo mode, VAFS tracker and anything else has been installed properly, with admin mode, and all recommended settings.
P.S.: See the attached XML file to get the flight data and associated errors.
Best regards,
Flavien Aymonnier
Landing gear error problem [SOLVED]
- FlavienA
- Class E Airspace
- Posts: 11
- Joined: June 12th, 2019, 2:38 pm
- VA Name: TUIFly Belgium virtual
- VA ID: 27228
- Callsign: JAF0001
- Location: France
- Contact:
Landing gear error problem [SOLVED]
You do not have the required permissions to view the files attached to this post.

- FlavienA
- Class E Airspace
- Posts: 11
- Joined: June 12th, 2019, 2:38 pm
- VA Name: TUIFly Belgium virtual
- VA ID: 27228
- Callsign: JAF0001
- Location: France
- Contact:
Re: Landing gear error problem
I have the answer, so apparently there is a communicaton problem between VAFS and XP11, because when we put the landing gear in the OFF position, it detects that it is in DOWN position, i guess this subject should me moved in the development thread.
Best regards,
Flavien Aymonnier
Best regards,
Flavien Aymonnier

- Sven2157
- Class A Airspace
- Posts: 2387
- Joined: January 13th, 2012, 4:35 pm
- VA Name: Chicago Flights
- VA ID: 17898
- Callsign: CFX2157
- Location: Chicago, IL
- Contact:
Re: Landing gear error problem
Yes, this is an error in programming the simulator, not VAFS. When you position the gear to OFF, you send a message to the client that the gear have changed state. The sim outputs 2 conditions, when it should output 3 conditions.
There is no fix for this, unless you can convince P3D or Microsoft to append the original code.
(yes, this still applies to X-Moron; as he stole the code from FSX!)
There is no fix for this, unless you can convince P3D or Microsoft to append the original code.
(yes, this still applies to X-Moron; as he stole the code from FSX!)